Introduce the features and advantages of Nomex flat ironing belts

• High-temperature resistance: Nomex fiber will not melt or decompose below 260℃ and can withstand long-term high-temperature ironing without deformation or damage.
• Wear-resistant: Nomex fiber has high strength and toughness, can resist friction and stretching, and is not easy to break or fall off.
• Chemical resistance: Nomex fiber is very stable to a variety of chemicals and will not corrode or discolor.
• Fire resistance: Nomex fiber has good flame-retardant properties and will not cause fire or produce toxic gases.
• Anti-static: Nomex fiber has anti-static properties, which can prevent static electricity from causing damage to clothing and equipment.

Explain the importance of care and maintenance of Nomex flat ironing belts

• Extended service life: Regular cleaning, lubrication, and replacement of the Nomex flat ironing machine belt can reduce its wear and aging, extend its service life, and save costs.
• Ensure ironing quality: Keeping the Nomex flat ironing machine belt clean and flat can avoid contamination or damage to the clothes and ensure the neatness and beauty of the clothes.
• Prevent failures and accidents: Checking and adjusting the tension and position of the Nomex flat ironing belts can prevent them from loosening or falling off, causing equipment failure or safety accidents.

How to clean the belt of Nomex flat ironing machine

1. Introduce the cleaning frequency and timing of Nomex flat ironing belts

• The frequency and timing of cleaning the Nomex flat ironing machine belt should be based on their usage.
• Generally speaking, it is recommended to wipe it with a clean cloth after use every day.
• Scrub it with a neutral detergent once a week, and deep clean it with a special detergent once a month.

2. Introduce the cleaning steps and precautions for the Nomex flat ironing belts

The cleaning steps and precautions for the Nomex flat ironing machine belt are as follows:

• Turn off the power of the device and wait for the Nomex flat ironing machine belt to cool down, then wipe its surface with a clean cloth to remove dust and impurities.
• After diluting it with neutral detergent or special detergent, moisten it with a soft-bristled brush or sponge and gently scrub the surface of the Nomex flat ironing belt.
• Be careful not to use excessive force or scratch its fibers.
• Rinse with clean water, dry with an absorbent cloth, or blow dry with low-temperature steam to avoid moisture residue.
• Check that the Nomex flat iron belt is completely dry and not damaged or deformed, then reinstall and adjust the tension and position.
• Turn on the power of the equipment and run it for a period of time to check whether the Nomex flat ironing belts are working normally and if there are no abnormalities.

Introduce the cleaning supplies and equipment provided by Nomex flat ironing machine

The cleaning supplies and equipment included with the Nomex flat iron include the following:

• Neutral detergent: Suitable for daily cleaning, can remove general stains and oil stains without causing damage to Nomex fibers.
• Special cleaner: suitable for deep cleaning, can remove stubborn stains and oil stains.
• While also having disinfecting and deodorizing effects.
• Soft-bristled brush or sponge: suitable for scrubbing the surface of the Nomex flat ironing machine belt.
• Which can effectively remove dirt and impurities without scratching its fibers.
• Absorbent cloth or low-temperature steam:
  suitable for drying the surface of the Nomex flat ironing belts.
• Which can quickly absorb or evaporate moisture to prevent water stains and mold.

How to replace the belt of the Nomex flat ironing machine

Introduce the reasons and standards for replacing the belt of the Nomex flat ironing machine

     1. The main reasons and standards for replacing the Nomex flat ironing belts are as follows:

• When the Nomex flat ironing machine is found to have obvious breaks, cracks, falling off, or deformation;
• When the Nomex flat iron is found to have serious stains, oil stains, or odor;
• When it is found that the Nomex flat ironing machine belt is not working properly
• Affecting the performance or safety of the equipment;

2. Introduce the replacement frequency and timing of the Nomex flat ironing machine belt.

• The frequency and timing of replacement of the  Nomex flat ironing belts should also be based on their usage. Generally speaking, it is recommended to replace it once a year.

3. Introduce the steps and precautions for replacing the belt of the Nomex flat ironing machine.

The steps and precautions for replacing the Nomex flat ironing belts are as follows:

• Please turn off the power of the equipment, and wait for the Nomex flat ironing belt to cool down.
• Use tools to disassemble its fixing device, and remove the old Nomex flat ironing belt.
• Be careful not to scratch or stain the surface of the equipment.
• Use a ruler or tape measure to measure the length, width, and thickness of the old Nomex flat ironing machine belt.
• Select the appropriate new Nomex flat ironing belts according to the equipment model.
• Be careful not to choose the wrong specification or material.
• Install the new Nomex flat ironing belts on the equipment, and fix its device with tools.
• Adjust its tension and position so that it fits well with the surface of the equipment without looseness or sliding.
• Turn on the power of the device and run it for a period of time to check whether the new Nomex flat ironing machine

The belt is working properly and if there are no abnormalities. If you have any questions, you can also watch our Facebook website：www.facebook.com/nomexfelt